Mark Aindow
Professor/Material Science and Engr
Are you Mark Aindow?
How to update your information.
Scholarly Contributions
291 Scholarly Contributions
, (1987). Hexagonal crystallography and interphase boundary dislocations, Scripta Metallurgica, vol. 21, iss. 7, 10.1016/0036-9748(87)90136-0
Research Type: Journal Article
, (1990). Threading dislocations in chemical-vapour-deposited β-SiC on (001)Si, Philosophical Magazine Letters, vol. 62, iss. 4, 10.1080/09500839008215129
Research Type: Journal Article
, (1990). On the influence of stoichiometry and purity on the deformation mechanisms in the intermetallic compound TiAl, Scripta Metallurgica et Materiala, vol. 24, iss. 6, 10.1016/0956-716X(90)90307-3
Research Type: Journal Article
, (1990). On the shape of edge-dislocation loops in β-NiAl, Philosophical Magazine Letters, vol. 62, iss. 5, 10.1080/09500839008215151
Research Type: Journal Article
Mark Aindow
, (1990). Interfacial structure in heteroepitaxial silicon on sapphire, Journal of the American Ceramic Society, vol. 73, iss. 5, pp. 1136--1143, 10.1111/j.1151-2916.1990.tb05169.x
Research Type: Journal Article
, (1990). On the extension of substrate dislocations into heteroepitaxial deposits, Philosophical Magazine Letters, vol. 62, iss. 3, 10.1080/09500839008215050
Research Type: Journal Article
Mark Aindow
, (1991). Concerning the dissociation of grown-in dislocations in melt spun ribbons of the intermetallic compound Nb3Al, Philosophical magazine letters, vol. 64, iss. 2, pp. 59--65, 10.1080/09500839108214667
Research Type: Journal Article
, (1991). On epitaxial misorientations, Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, vol. 63, iss. 4, 10.1080/01418619108213907
Research Type: Journal Article
, (1992). The use of electrochemical scanning tunneling microscopy to study the initial stages of electrodeposition in situ; overpotential deposition of Pb and Pt on HOPG, Transactions of the Institute of Metal Finishing, vol. 70, iss. 4, Taylor and Francis Ltd., 10.1080/00202967.1992.11870967
Research Type: Journal Article
, (1992). General discussion, Faraday Discussions, vol. 94, iss. Issue, 10.1039/FD9929400229
Research Type: Journal Article
, (1992). Use of ferrofluids to obtain magnetic domain images in AFM, Microscopy Research and Technique, vol. 23, iss. 1, 10.1002/jemt.1070230109
Research Type: Journal Article
, (1993). Geometry and interface structure of island nuclei for GaSb buffer layers grown on (001) GaAs by metalorganic vapour phase epitaxy, Journal of Crystal Growth, vol. 133, iss. 1-2, 10.1016/0022-0248(93)90117-F
Research Type: Journal Article
, (1993). Analysis of the dislocation network at a low-angle near-twist boundary in zinc, Scripta Metallurgica et Materiala, vol. 29, iss. 6, 10.1016/0956-716X(93)90232-H
Research Type: Journal Article
Mark Aindow,
, (1993). Deformation mechanisms in intermetallic compounds based on Nb3Al, Materials Science and Engineering A, vol. 170, iss. 1-2, 10.1016/0921-5093(93)90363-J
Research Type: Journal Article
, (1993). Observation of a metastable B2 phase in rapidly solidified ribbons of NbAl alloys, Scripta Metallurgica et Materiala, vol. 29, iss. 10, 10.1016/0956-716X(93)90122-9
Research Type: Journal Article
, (1993). Microscopic studies of YBCO single crystals, Journal of Crystal Growth, vol. 128, iss. 1-4, 10.1016/S0022-0248(07)80040-6
Research Type: Journal Article
, (1994). The origins of growth spirals on laser-ablated YBa2Cu3O7-δ thin films, Philosophical Magazine Letters, vol. 70, iss. 1, 10.1080/09500839408243870
Research Type: Journal Article
, (1994). On the origins of ‘forbidden’ 100-type spots in electron diffraction patterns from the A15 compounds Nb3Al, Cr3Si and V3Si, Philosophical Magazine Letters, vol. 69, iss. 1, 10.1080/09500839408242433
Research Type: Journal Article
, (1994). An HREM study of the ionic conductor strontium lithium β-alumina, Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties, vol. 69, iss. 4, 10.1080/01418639408240134
Research Type: Journal Article
, (1994). The influence of substrate surface preparation on the microstructure of CdTe grown on (001) GaAs by metalorganic chemical vapour deposition, Journal of Crystal Growth, vol. 135, iss. 3-4, 10.1016/0022-0248(94)90129-5
Research Type: Journal Article
, (1994). Development of anisotropic microtwin distributions in GaAs grown on 4°-off (001) Si by molecular beam epitaxy, Applied Physics Letters, vol. 65, iss. 15, 10.1063/1.112834
Research Type: Journal Article
, (1995). A study of the Pd/highly oriented pyrolytic graphite electrodeposition system by in situ electrochemical scanning tunnelling microscopy, Journal of Electroanalytical Chemistry, vol. 395, iss. 1-2, 10.1016/0022-0728(95)04081-X
Research Type: Journal Article
, (1995). Annealing twins in dilute Al-Mn-Si alloys, Philosophical Magazine Letters, vol. 72, iss. 4, 10.1080/09500839508242451
Research Type: Journal Article
, (1995). The role of the initial nucleation stage in microstructural development for CdTe grown on heat-cleaned 2°-off (001)GaAs by metalorganic chemical vapour deposition, Journal of Crystal Growth, vol. 154, iss. 3-4, 10.1016/0022-0248(95)00117-4
Research Type: Journal Article
, (1995). Formation and microstructural development of TiSi2 in (111)Si by Ti ion implantation and annealing at 950 °C, Journal of Materials Research, vol. 10, iss. 4, 10.1557/JMR.1995.0891
Research Type: Journal Article
, (1995). Microstructures and Properties of Laser-Ablated Epitaxial Y-Ba-Cu-O Thin Films for Electronic Device Applications, IEEE Transactions on Applied Superconductivity, vol. 5, iss. 2, 10.1109/77.402780
Research Type: Journal Article
, (1995). Effects of low‐power plasma treatment on polyethylene surfaces, Surface and Interface Analysis, vol. 23, iss. 5, 10.1002/sia.740230508
Research Type: Journal Article
, (1995). A study of surface cross-hatch and misfit dislocation structure in In0.15Ga0.85As/GaAs grown by chemical beam epitaxy, Journal of Crystal Growth, vol. 149, iss. 1-2, 10.1016/0022-0248(94)00669-5
Research Type: Journal Article
, (1996). Hydrogen-assisted stable crack growth in iron-3 WT% silicon steel, Acta Materialia, vol. 44, iss. 8, Elsevier Ltd, 10.1016/1359-6454(95)00429-7
Research Type: Journal Article
Mark Aindow,
, (1996). Identification of the reference structure for a high angle grain boundary in titanium, Materials Science Forum, vol. 207-209, iss. 1, Trans Tech Publications Ltd, 10.4028/www.scientific.net/msf.207-209.289
Research Type: Journal Article
, (1996). In situ electrochemical scanning probe microscopy corrosion studies on duplex stainless steel in aqueous NaCl solutions, British Corrosion Journal, vol. 31, iss. 2, IOM Communications Ltd., 10.1179/bcj.1996.31.2.139
Research Type: Journal Article
, (1996). Structure of a 12.29° near-tilt grain boundary in titanium, Philosophical Magazine Letters, vol. 73, iss. 5, 10.1080/095008396180687
Research Type: Journal Article
, (1996). The application of pettifor structure maps to ternary additions in Nb3Al-based alloys, Scripta Materialia, vol. 34, iss. 2, Elsevier Ltd, 10.1016/1359-6462(95)00512-9
Research Type: Journal Article
, (1996). Misfit dislocations in laser-ablated heteroepitaxial YBa2Cu3O7-δ on MgO(001), Philosophical Magazine Letters, vol. 74, iss. 4, 10.1080/095008396180218
Research Type: Journal Article
, (1996). Stacking-fault energy in the C15 laves phase Cr2Nb, Philosophical Magazine Letters, vol. 74, iss. 3, 10.1080/095008396180272
Research Type: Journal Article
, (1996). Structural imaging of mechanically alloyed remanence-enhanced Sm2Fe17N3/α-Fe, Journal of Magnetism and Magnetic Materials, vol. 157-158, iss. Issue, Elsevier, 10.1016/0304-8853(95)01157-9
Research Type: Journal Article
, (1996). Precipitation and migration of point defects in MOCVD CdxHg1-xTe, Journal of Crystal Growth, vol. 159, iss. 1-4, Elsevier, 10.1016/0022-0248(95)00682-6
Research Type: Journal Article
, (1996). Instrumental effects on in situ electrochemical STM studies: An investigation of a current surge induced Pd deposit on HOPG, Microscopy Research and Technique, vol. 34, iss. 1, Wiley-Liss Inc., 10.1002/(SICI)1097-0029(19960501)34:1<87::AID-JEMT12>3.0.CO;2-L
Research Type: Journal Article
, (1997). The effects of Al substitution on the microstructure and properties of laser-ablated epitaxial YBa2Cu3O7-δ films on (001) MgO, Physica C: Superconductivity and its Applications, vol. 274, iss. 1-2, Elsevier, 10.1016/S0921-4534(96)00656-9
Research Type: Journal Article
Mark Aindow
, (1997). Magnetic noise in YBCO thin films and its relationship to growth morphology, IEEE transactions on applied superconductivity, vol. 7, iss. 2, pp. 1624--1627, 10.1109/77.620888
Research Type: Journal Article
, (1997). The effect of finely dispersed particles on primary recrystallisation textures in Al-Mn-Si alloys, Materials Science and Engineering: A, vol. 225, iss. 1-2, Elsevier BV, 10.1016/s0921-5093(96)10571-2
Research Type: Journal Article
, (1997). The effect of selected process parameters on laser ablated YBCO thin films on SrTiO3 substrates, Journal of Alloys and Compounds, vol. 251, iss. 1-2, Elsevier BV, 10.1016/S0925-8388(96)02782-X
Research Type: Journal Article
, (1997). Topographical development and misfit relief in laser-ablated heteroepitaxial YBa2Cu3O7-δ thin films, Journal of Crystal Growth, vol. 172, iss. 1-2, Elsevier, 10.1016/S0022-0248(96)00723-3
Research Type: Journal Article
, (1997). Deformation behaviour of the C15 Laves phase Cr2Nb, Materials Science and Engineering: A, vol. 233, iss. 1-2, Elsevier BV, 10.1016/s0921-5093(97)00047-6
Research Type: Journal Article
, (1997). Reassessment of the constrained coincident-site-lattice model for reference structures in vicinal high-angle grain boundaries, Philosophical Magazine Letters, vol. 76, iss. 1, 10.1080/095008397179345
Research Type: Journal Article
, (1997). Microstructures and deformation behaviour in Nb/10-25at.%Al/20-40at.%V alloys, Acta Materialia, vol. 45, iss. 12, Elsevier Ltd, 10.1016/S1359-6454(97)00195-X
Research Type: Journal Article
, (1997). Mapping the variations in properties of PLD films of YBCO deposited over large areas, Journal of Alloys and Compounds, vol. 251, iss. 1-2, Elsevier BV, 10.1016/S0925-8388(96)02821-6
Research Type: Journal Article
, (1997). Analysis of the reference structure adopted by a mixed tilt-twist vicin al high-angle grain boundary in titanium, Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, vol. 76, iss. 4, 10.1080/01418619708214215
Research Type: Journal Article
Mark Aindow,
, (1998). The Character of Steps on Gamma/Alpha-2 Interfaces in Lamellar TiAl-Based Alloys, Materials Science Forum, vol. 294-296, pp. 239-242, Trans Tech Publications, Ltd., 10.4028/www.scientific.net/msf.294-296.239
Research Type: Journal Article
Mark Aindow
, (1998). High-temperature creep of Nb-Al-V alloys, 10.1557/PROC-552-KK8.28.1
Research Type: Journal Article
, (1998). The effect of substrate-off-cut on the properties of epitaxial thin films of YBa2Cu3O7-δ grown by pulsed laser deposition, Applied Surface Science, vol. 127-129, iss. Issue, Elsevier, 10.1016/S0169-4332(97)00698-3
Research Type: Journal Article
Mark Aindow
, (1998). Analysis of a 69.3° Near-Twist Boundary in Titanium; A Comparison of Two- and Three- Dimensional Models for the Reference Structure, Materials Science Forum, vol. 294-296, pp. 309-312, Trans Tech Publications, Ltd., 10.4028/www.scientific.net/msf.294-296.309
Research Type: Journal Article
On the orientation relationships between A15 precipitates and the Nb-rich matrix in Nb-Al(-X) alloys
, (1999). On the orientation relationships between A15 precipitates and the Nb-rich matrix in Nb-Al(-X) alloys, Philosophical Magazine Letters, vol. 79, iss. 3, 10.1080/095008399177453
Research Type: Journal Article
The character of steps on gamma/alpha-2 interfaces in lamellar TiAl-based alloys
, (1999). The character of steps on gamma/alpha-2 interfaces in lamellar TiAl-based alloys, Materials Science Forum, Trans Tech Publications Ltd
Research Type: Journal Article
, (1999). Dislocation processes during the plastic deformation of γ-TiAl, Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, vol. 79, iss. 5, 10.1080/01418619908210346
Research Type: Journal Article
, (1999). The mechanism of mixed-mode phase transformations, 10.1557/PROC-586-21
Research Type: Journal Article
, (1999). Self-assembly of size-selected colloidal metal clusters: Crystalline descriptions of non-close-packed arrangements, Philosophical Magazine Letters, vol. 79, iss. 8, 10.1080/095008399176940
Research Type: Journal Article
, (1999). A high-resolution electron microscopy study of steps on lamellar γ-α2 interfaces in a low-misfit TiAl-based alloy, Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, vol. 79, iss. 10, 10.1080/01418619908214299
Research Type: Journal Article
, (1999). On the effect of antiphase domain boundaries on ALCHEMI, Physica Status Solidi (B) Basic Research, vol. 214, iss. 2, Wiley-VCH Verlag, 10.1002/(SICI)1521-3951(199908)214:2<237::AID-PSSB237>3.0.CO;2-L
Research Type: Journal Article
, (2000). Effect of etchant composition on film structure during laser-assisted porous Si growth, Physica Status Solidi (A) Applied Research, vol. 182, iss. 1, 10.1002/1521-396X(200011)182:1<87::AID-PSSA87>3.0.CO;2-N
Research Type: Journal Article
, (2000). Interfacial dislocation mechanism for diffusional phase transformations exhibiting martensitic crystallography: formation of TiAl + Ti3Al lamellae, Acta Materialia, vol. 48, iss. 5, Elsevier Science Ltd, 10.1016/S1359-6454(99)00416-4
Research Type: Journal Article
, (2000). High-resolution electron microscopy of steps on misfitting lamellar γ-α2 interfaces in a Ti-44 at.% Al-8 at.% Nb alloy, Philosophical Magazine Letters, vol. 80, iss. 1, 10.1080/095008300176399
Research Type: Journal Article
, (2000). Orientational and translational ordering of sub-monolayer films of passivated multiply-twinned gold clusters, Journal of Physics D: Applied Physics, vol. 33, iss. 2, IOP, 10.1088/0022-3727/33/2/104
Research Type: Journal Article
, (2000). Identifying the character of intrinsic stacking faults in the A15 compound Nb3Al, Philosophical Magazine Letters, vol. 80, iss. 8, 10.1080/09500830050110440
Research Type: Journal Article
, (2000). Analysis of a 69.3° vicinal HAGB in pure titanium, Interface Science, vol. 8, iss. 1, Kluwer Academic Publishers, 10.1023/A:1008770918151
Research Type: Journal Article
Mark Aindow,
, (2000). On the role of the pore filling medium in photoluminescence from photochemically etched porous silicon, Journal of Applied Physics, vol. 88, iss. 5, American Institute of Physics Inc., 10.1063/1.1287770
Research Type: Journal Article
, (2001). The influence of oxide layers on the initiation of carbon deposition on stainless steel, Oxidation of Metals, vol. 56, iss. 3-4, Kluwer Academic/Plenum Publishers, 10.1023/a:1010320727492
Research Type: Journal Article
, (2001). Microstructure of laser-ablated superconducting La2CuO4Fx thin films on SrTiO3, Journal of Materials Research, vol. 16, iss. 11, 10.1557/JMR.2001.0455
Research Type: Journal Article
, (2001). The interaction between extended dislocations and antiphase domain boundaries - I: Superpartial separation and the yield stress, Intermetallics, vol. 9, iss. 6, 10.1016/S0966-9795(01)00031-0
Research Type: Journal Article
, (2001). The interaction between extended dislocations and antiphase domain boundaries - II: Uncoupled superpartial dislocations and planar slip, Intermetallics, vol. 9, iss. 6, 10.1016/S0966-9795(01)00032-2
Research Type: Journal Article
, (2001). Microstructural characteristics of the eutectoid mixture Zr2Cu and Zr7Cu10, Journal of Materials Science Letters, vol. 20, iss. 6, 10.1023/A:1010932601393
Research Type: Journal Article
, (2001). Defect formation in Nd2Fe14B grains caused by Zn diffusion, Philosophical Magazine Letters, vol. 81, iss. 4, 10.1080/09500830010029427
Research Type: Journal Article
Mark Aindow,
, (2002). Magnesium manganese oxide nanoribbons: Synthesis, characterization, and catalytic application, Journal of Physical Chemistry B, vol. 106, iss. 38, 10.1021/jp0208586
Research Type: Journal Article
, (2002). Erratum: The influence of oxide layers on the initiation of carbon deposition on stainless steel (Oxidation of Metals (October 2001) 56:3-4 (240)), Oxidation of Metals, vol. 57, iss. 5-6, 10.1023/A:1017440023707
Research Type: Journal Article
, (2002). Microstructure and mechanical behaviour of Nb-Al-V alloys with 10-25 at.% Al and 20-40 at.% V - II: Mechanical behaviour and deformation mechanisms, Intermetallics, vol. 10, iss. 1, 10.1016/S0966-9795(01)00077-2
Research Type: Journal Article
, (2002). Microstructure and mechanical behaviour of Nb-Al-V alloys with 10-25 at.% Al and 20-40 at.% V - I: Microstructural observations, Intermetallics, vol. 10, iss. 1, 10.1016/S0966-9795(01)00076-0
Research Type: Journal Article
, (2002). Adoption of near-coincident-site lattice orientations by contacting monolayer rafts of metallic nanoparticles with different superlattice periodicities, Philosophical Magazine Letters, vol. 82, iss. 1, 10.1080/09500830110100660
Research Type: Journal Article
, (2002). Nucleation of the C40-to-C11b transformation in magnetron-sputtered MoSi2 thin films, Philosophical Magazine Letters, vol. 82, iss. 12, 10.1080/0950083021000038083
Research Type: Journal Article
, (2002). Crystallization of glassy powder from aluminum-rare earth- transition metal alloys, PROC-754-CC11.7
Research Type: Journal Article
, (2002). Oxygen-stabilised partial amorphisation in a Zr50Cu50 alloy, Journal of Materials Science, vol. 37, iss. 4, 10.1023/A:1013887730514
Research Type: Journal Article
, (2002). A transmission electron microscope study of microstructural development in magnetron-sputtered MoSi2 thin films, Intermetallics, vol. 10, iss. 9, 10.1016/S0966-9795(02)00035-3
Research Type: Journal Article
Mark Aindow
, (2003). Effects of alkali metal and ammonium cation templates on nanofibrous cryptomelane-type manganese oxide octahedral molecular sieves (OMS-2), Journal of Physical Chemistry B, vol. 107, iss. 35, American Chemical Society, 10.1021/jp0300593
Research Type: Journal Article
, (2003). Effect of self-accommodation on α/α boundary populations in pure titanium, Acta Materialia, vol. 51, iss. 9, 10.1016/S1359-6454(03)00035-1
Research Type: Journal Article
, (2003). Effects of Zn coating on the microstructure and magnetic properties of Nd-Fe-B magnets, Journal of Alloys and Compounds, vol. 351, iss. 1-2, 10.1016/S0925-8388(02)01070-8
Research Type: Journal Article
, (2003). Formation of a self-assembled Cu/γ-Al2O3 nanocomposite, Philosophical Magazine Letters, vol. 83, iss. 2, 10.1080/0950083021000056614
Research Type: Journal Article
Mark Aindow,
, (2003). Erratum: Assembly of CdSe nanocrystals into well-ordered monolayers with a strong crystallographic texture (Philosophical Magazine Letters 83:9 (569-574)), Philosophical Magazine Letters, vol. 83, iss. 11, Taylor and Francis Ltd., 10.1080/714087238
Research Type: Journal Article
Mark Aindow,
, (2003). Techniques for microstructural characterization of powder-processed nickel-based superalloys, Materials Science and Engineering: A, vol. 360, iss. 1-2, Elsevier BV, 10.1016/S0921-5093(03)00498-2
Research Type: Journal Article
, (2003). Zn diffusion induced precipitation along grain boundaries in Zn-coated NdFeB magnets, Journal of Magnetism and Magnetic Materials, vol. 261, iss. 1-2, 10.1016/S0304-8853(02)01407-5
Research Type: Journal Article
, (2003). Measurement of epitaxial misorientations and related effects in thin films of YBa2Cu3O7-δ grown on nominally (001)MgO substrates by pulsed laser deposition, Thin Solid Films, vol. 423, iss. 1, 10.1016/S0040-6090(02)00999-9
Research Type: Journal Article
Mark Aindow
, (2003). Characterization of the microstructure and phase equilibria calculations for the powder metallurgy superalloy IN100, Journal of Materials Research, vol. 18, iss. 11, Materials Research Society, 10.1557/JMR.2003.0371
Research Type: Journal Article
Mark Aindow,
, (2003). Assembly of CdSe nanocrystals into well-ordered monolayers with a strong crystallographic texture, Philosophical Magazine Letters, vol. 83, iss. 9, 10.1081/0950083031000151365
Research Type: Journal Article
Precipitate orientation relationships and interfacial structures in duplex stainless steel Zeron-100
Mark Aindow,
, (2003). Precipitate orientation relationships and interfacial structures in duplex stainless steel Zeron-100, Philosophical Magazine, vol. 83, iss. 16, 10.1080/1478643031000107249
Research Type: Journal Article
, (2004). Nucleation of the lamellar decomposition in a Ti-44Al-4Nb-4Zr alloy, Acta Materialia, vol. 52, iss. 1, 10.1016/j.actamat.2003.09.005
Research Type: Journal Article
Mark Aindow,
, (2004). Observation of tension/compression asymmetry in an Nb-Al-V alloy, Materials Science and Engineering: A, vol. 387-389, iss. 1-2, Elsevier BV, 10.1016/j.msea.2004.01.139
Research Type: Journal Article
Mark Aindow,
, (2004). Synthesis, characterization, and catalytic applications of manganese oxide Octahedral Molecular Sieve (OMS) nanowires with a 2 x 3 tunnel structure, Chemistry of Materials, vol. 16, iss. 25, 10.1021/cm049291r
Research Type: Journal Article
, (2004). Effect of heat-treatment on the microstructure and hardness of a devitrified Al-3.0Y-3.0Gd-5.0Ni-1.0Fe-1.0Co alloy, Scripta Materialia, vol. 51, iss. 6, Elsevier Ltd, 10.1016/j.scriptamat.2004.05.050
Research Type: Journal Article
, (2004). Phase stability and microstructure in devitrified Al-rich Al-Y-Ni alloys, Intermetallics, vol. 12, iss. 4, 10.1016/j.intermet.2003.11.007
Research Type: Journal Article
Mark Aindow,
, (2004). Preparation of platinum/carbon aerogel nanocomposites using a supercritical deposition method, Journal of Physical Chemistry B, vol. 108, iss. 23, 10.1021/jp049535v
Research Type: Journal Article
, (2004). High-resolution transmission electron microscopy studies of planar defects in the magnetic superconductor RuSr2EuCu2O8, Applied Physics Letters, vol. 85, iss. 15, 10.1063/1.1805176
Research Type: Journal Article
, (2004). Pseudo-elastic deformation behavior in a Ti/Mo-based alloy, Scripta Materialia, vol. 50, iss. 3, 10.1016/j.scriptamat.2003.10.012
Research Type: Journal Article
, (2004). Interfacial defects and lamellar decomposition in titanium aluminides, Interface Science, vol. 12, iss. Issue 2-3, 10.1023/B:INTS.0000028658.15867.87
Research Type: Journal Article
Mark Aindow,
, (2004). Size Control, Metal Substitution, and Catalytic Application of Cryptomelane Nanomaterials Prepared Using Cross-linking Reagents, Chemistry of Materials, vol. 16, iss. 2, 10.1021/cm0303989
Research Type: Journal Article
, (2004). Threading dislocation generation in epitaxial (Ba,Sr)TiO3 films grown on (001) LaAlO3 by pulsed laser deposition, Applied Physics Letters, vol. 84, iss. 10, American Institute of Physics Inc., 10.1063/1.1664035
Research Type: Journal Article
Microstructure and mechanical behavior of Nb-(10,15)A1-20V alloys
, (2004). Microstructure and mechanical behavior of Nb-(10,15)A1-20V alloys, Acta Metallurgica Sinica (English Letters), vol. 17, iss. 4
Research Type: Journal Article
Mark Aindow,
, (2005). Preparation and characterization of ruthenium/carbon aerogel nanocomposites via a supercritical fluid route, Journal of Physical Chemistry B, vol. 109, iss. 7, 10.1021/jp0467595
Research Type: Journal Article
Mark Aindow,
, (2005). Supported platinum nanoparticles by supercritical deposition, Industrial and Engineering Chemistry Research, vol. 44, iss. 11, 10.1021/ie050345w
Research Type: Journal Article
Mark Aindow,
, (2005). Cd2P2Se6 nanolenses formed at a water-air interface, Journal of Materials Science, vol. 40, iss. 15, 10.1007/s10853-005-0624-9
Research Type: Journal Article
, (2005). Origin of pseudoelastic behavior in Ti-Mo-based alloys, Applied Physics Letters, vol. 87, iss. 24, 10.1063/1.2142089
Research Type: Journal Article
Mark Aindow,
, (2005). Control of nanometer-scale tunnel sizes of porous manganese oxide octahedral molecular sieve nanomaterials, Advanced Materials, vol. 17, iss. 7, 10.1002/adma.200401225
Research Type: Journal Article
Mark Aindow,
, (2005). A hybrid replication technique for the analysis of precipitate-boundary interactions in Ni-based superalloys, Journal of Materials Science, vol. 40, iss. 13, 10.1007/s10853-005-2848-0
Research Type: Journal Article
, (2005). Incorporation of fluorine ions into hydroxyapatite by a pH cycling method, Journal of Materials Science - Materials in Medicine, vol. 16, iss. Issue 5, pp. 447-453, 10.1007/s10856-005-6985-4
Research Type: Journal Article
, (2005). Nucleation of stress-induced martensites in a Ti/Mo-based alloy, Journal of Materials Science, vol. 40, iss. 11, 10.1007/s10853-005-2426-5
Research Type: Journal Article
, (2005). The structure of ternary compounds in a devitrified Al-rich Al-Ni-Gd alloy, Intermetallics, vol. 13, iss. 7, 10.1016/j.intermet.2004.11.004
Research Type: Journal Article
, (2005). Strong degradation of physical properties and formation of a dead layer in ferroelectric films due to interfacial dislocations, Integrated Ferroelectrics, vol. 71, pp. 67-80, 10.1080/10584580590964709
Research Type: Journal Article
, (2005). Phase formation during the devitrification of Al-rich melt-spun Al-8.5Ni-5.0Y-3.0(Co,Fe) alloys, Scripta Materialia, vol. 52, iss. 8, 10.1016/j.scriptamat.2004.12.024
Research Type: Journal Article
Mark Aindow,
, (2005). Investigation of the supercritical deposition of platinum nanoparticles into carbon aerogels, Microporous and Mesoporous Materials, vol. 80, iss. 1-3, 10.1016/j.micromeso.2004.11.019
Research Type: Journal Article
Mark Aindow,
, (2005). The microstructural evolution of NbAlV ternary alloys, Intermetallics, vol. 13, iss. 11, 10.1016/j.intermet.2005.02.011
Research Type: Journal Article
Mark Aindow,
, (2005). Amine-assisted facetted etching of CdSe nanocrystals, Journal of the American Chemical Society, vol. 127, iss. 8, 10.1021/ja0465404
Research Type: Journal Article
Mark Aindow,
, (2005). Synthesis and catalytic activity of cryptomelane-type manganese dioxide nanomaterials produced by a novel solvent-free method, Chemistry of Materials, vol. 17, iss. 21, 10.1021/cm051294w
Research Type: Journal Article
, (2006). The structure of ribbon borides in a Ti-44Al-4Nb-4Zr-1B alloy, Intermetallics, vol. 14, iss. 7, 10.1016/j.intermet.2005.11.013
Research Type: Journal Article
, (2006). Thermodynamic and electrostatic analysis of threading dislocations in epitaxial ferroelectric films, Applied Physics Letters, vol. 88, iss. 10, 10.1063/1.2178194
Research Type: Journal Article
Mark Aindow,
, (2006). Band-edge photoluminescence recovery from zinc-blende CdSe nanocrystals synthesized at room temperature, Advanced Functional Materials, vol. 16, iss. 3, 10.1002/adfm.200500319
Research Type: Journal Article
Mark Aindow,
, (2006). Hydrothermal synthesis of structure- And shape-controlled manganese oxide octahedral molecular sieve nanomaterials, Advanced Functional Materials, vol. 16, iss. 9, 10.1002/adfm.200500504
Research Type: Journal Article
, (2006). Defect microstructures in epitaxial PbZr0.2Ti0.8O3 films grown on (001) SrTiO3 by pulsed laser deposition, Journal of Materials Science, vol. 41, iss. 3, 10.1007/s10853-006-6488-9
Research Type: Journal Article
, (2006). Morphology and interfacial structure of gamma precipitates in the beta phase of a Ti-Al-Nb-Zr alloy, Journal of Materials Science, vol. 41, iss. 3, 10.1007/s10853-006-6477-z
Research Type: Journal Article
Mark Aindow,
, (2006). Hydrothermal growth of manganese dioxide into three-dimensional hierarchical nanoarchitectures, Advanced Functional Materials, vol. 16, iss. 4, 10.1002/adfm.200500436
Research Type: Journal Article
Mark Aindow
, (2006). Accommodation of angular incompatibilities between interfacial facets during precipitate growth, Metallurgical and Materials Transactions A, vol. 37, pp. 901--909, 10.1007/s11661-006-0064-4
Research Type: Journal Article
Mark Aindow,
, (2006). In situ synthesis of mixed-valent manganese oxide nanocrystals: An in situ synchrotron X-ray diffraction study, Journal of the American Chemical Society, vol. 128, iss. 14, 10.1021/ja058456+
Research Type: Journal Article
, (2007). The mechanical properties and the deformation microstructures of the C15 Laves phase Cr2Nb at high temperatures, Acta Materialia, vol. 55, iss. 6, 10.1016/j.actamat.2006.10.048
Research Type: Journal Article
Mark Aindow,
, (2007). Grain boundary curvature in a model Ni-based superalloy, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 38, iss. 1, 10.1007/s11661-006-9032-2
Research Type: Journal Article
Mark Aindow
, (2007). Decoration of multi-wall carbon nanotubes with platinum nanoparticles using supercritical deposition with thermodynamic control of metal loading, Scripta Materialia, vol. 56, iss. 2, 10.1016/j.scriptamat.2006.09.019
Research Type: Journal Article
Mark Aindow
, (2007). Shape evolution of single-crystalline Mn2O3 using a solvothermal approach, Journal of Physical Chemistry C, vol. 111, iss. 40, 10.1021/jp0745539
Research Type: Journal Article
Mark Aindow
, (2008). Microstructures and mechanical properties of Nb-Ti-C alloys, Materials Science and Engineering: A, vol. 485, iss. 1-2, Elsevier BV, 10.1016/j.msea.2007.08.035
Research Type: Journal Article
Mark Aindow
, (2008). Pt-based electrocatalysts for polymer electrolyte membrane fuel cells prepared by supercritical deposition technique, Journal of Power Sources, vol. 179, iss. 2, 10.1016/j.jpowsour.2007.12.086
Research Type: Journal Article
, (2008). On the self-pinning character of synchro-Shockley dislocations in a Laves phase during strain rate cyclical compressions, Scripta Materialia, vol. 59, iss. 7, 10.1016/j.scriptamat.2008.06.024
Research Type: Journal Article
Mark Aindow,
, (2008). Dielectric response and tunability of a dielectric-paraelectric composite, vol. 93, iss. 10, pp. 102908, Applied Physics Letters, 10.1063/1.2982086
Research Type: Journal Article
Mark Aindow
, (2008). Microstructure and phase stability in a Nb-Mo-Cr-Al-Si alloy, Journal of Materials Science, vol. 43, iss. 22, 10.1007/s10853-008-3042-y
Research Type: Journal Article
, (2008). Thickness dependence of electronic phase transitions in epitaxial V2O3 films on (0001) LiTaO3, Applied Physics Letters, vol. 93, iss. 11, 10.1063/1.2978352
Research Type: Journal Article
Mark Aindow
, (2008). Grain growth and particle pinning in a model Ni-based superalloy, Materials Science and Engineering: A, vol. 479, iss. 1-2, Elsevier BV, 10.1016/j.msea.2007.09.055
Research Type: Journal Article
, (2008). Cation ordering in epitaxial lead zirconate titanate films, Applied Physics Letters, vol. 93, iss. 26, American Institute of Physics Inc., 10.1063/1.3058755
Research Type: Journal Article
Mark Aindow,
, (2008). Behavior of H2 chemisorption on Ru/TiO2 surface and its application in evaluation of Ru particle sizes compared with TEM and XRD analyses, Applied Catalysis A: General, vol. 335, iss. 2, 10.1016/j.apcata.2007.11.017
Research Type: Journal Article
Mark Aindow,
, (2009). ZnO with different morphologies synthesized by solvothermal methods for enhanced photocatalytic activity, Chemistry of Materials, vol. 21, iss. 13, 10.1021/cm900608d
Research Type: Journal Article
, (2009). Electron microscopy resources and education at the Institute of Materials Science, University of Connecticut, Microscopy and Microanalysis, vol. 15, iss. 2, 10.1017/S1431927609098043
Research Type: Journal Article
Mark Aindow
, (2009). Nanoscale carbide precipitation in the recast layer of a percussion laser-drilled superalloy, Scripta Materialia, vol. 61, iss. 10, 10.1016/j.scriptamat.2009.07.034
Research Type: Journal Article
Mark Aindow
, (2009). Characterization of microstructural effects in a percussion laser-drilled powder metallurgy Ni-based superalloy, Journal of Materials Science, vol. 44, iss. 2, 10.1007/s10853-008-3177-x
Research Type: Journal Article
Mark Aindow,
, (2009). Polymorphism in the Laves-phase precipitates of a quinternary Nb-Mo-Cr-Al-Si alloy, Scripta Materialia, vol. 60, iss. 2, 10.1016/j.scriptamat.2008.08.034
Research Type: Journal Article
, (2009). Modification of carbon aerogel supports for PEMFC catalysts, International Journal of Hydrogen Energy, vol. 34, iss. 21, 10.1016/j.ijhydene.2009.08.055
Research Type: Journal Article
Mark Aindow
, (2009). Atomic site occupancies and mechanical response of the eutectic C14 and A15 phases in a quinternary Nb-Mo-Cr-Al-Si alloy, Scripta Materialia, vol. 60, iss. 5, 10.1016/j.scriptamat.2008.10.026
Research Type: Journal Article
Mark Aindow
, (2009). Vulcan-supported Pt electrocatalysts for PEMFCs prepared using supercritical carbon dioxide deposition, Chemical Engineering Communications, vol. 196, iss. Issue 1-2, pp. 194-203, 10.1080/00986440802290110
Research Type: Journal Article
, (2009). Preparation of carbon black supported Pd, Pt and Pd-Pt nanoparticles using supercritical CO2 deposition, Journal of Supercritical Fluids, vol. 50, iss. 1, 10.1016/j.supflu.2009.04.001
Research Type: Journal Article
Mark Aindow,
, (2009). Stability and work function of TiCxN1−x alloy surfaces: Density functional theory calculations, vol. 80, iss. 20, pp. 201406, Physical Review B, 10.1103/physrevb.80.201406
Research Type: Journal Article
Heteroepitaxial growth of nanoscale oxide shell/fiber superstructures by mild hydrothermal processes
Mark Aindow,
, (2010). Heteroepitaxial growth of nanoscale oxide shell/fiber superstructures by mild hydrothermal processes, Small, vol. 6, iss. 9, 10.1002/smll.200902381
Research Type: Journal Article
Mark Aindow,
, (2010). Phase homogeneity in MgO-ZrO2 nanocomposites synthesized by a combined sol-gel/thermal decomposition route, vol. 93, iss. 10, pp. 3102-3109, Journal of the American Ceramic Society, 10.1111/j.1551-2916.2010.03821.x
Research Type: Journal Article
Nanostructured arrays of semiconducting octahedral molecular sieves by pulsed-laser deposition
Mark Aindow,
, (2010). Nanostructured arrays of semiconducting octahedral molecular sieves by pulsed-laser deposition, Nature Materials, vol. 9, iss. 1, pp. 54--59
Research Type: Journal Article
, (2010). Base metal alloys with self-healing native conductive oxides for electrical contact materials, Applied Physics Letters, vol. 97, iss. 15, 10.1063/1.3499369
Research Type: Journal Article
Mark Aindow,
, (2010). Extraction replication studies of near-surface microstructures in laser-drilled samples of the powder metallurgy Ni-based superalloy IN100, Materials Characterization, vol. 61, iss. 10, 10.1016/j.matchar.2010.06.003
Research Type: Journal Article
Mark Aindow,
, (2010). PtPd/BP2000 electrocatalysts prepared by sequential supercritical carbon dioxide deposition, International Journal of Hydrogen Energy, vol. 35, iss. 21, 10.1016/j.ijhydene.2010.08.059
Research Type: Journal Article
Mark Aindow,
, (2011). A foaming esterification sol-gel route for the synthesis of magnesia-yttria nanocomposites, vol. 94, iss. 2, pp. 367-371, Journal of the American Ceramic Society, 10.1111/j.1551-2916.2010.04343.x
Research Type: Journal Article
Mark Aindow,
, (2011). Phase Homogeneity in Y2O3-MgO Nano-Composites Synthesized by Thermal Decomposition of Nitrate Precursors with Ammonium Acetate Additions, vol. 94, iss. 12, pp. 4207–4217, Journal of the American Ceramic Society, 10.1111/j.1551-2916.2011.04787.x
Research Type: Journal Article
Characterization of the Fe-Doped Mixed-Valent Tunnel Structure Manganese Oxide K-OMS-2
Mark Aindow,
, (2011). Characterization of the Fe-Doped Mixed-Valent Tunnel Structure Manganese Oxide K-OMS-2, vol. 115, iss. 44, pp. 21610–21619, Journal of Physical Chemistry C
Research Type: Journal Article
Electrical and tribological properties of a Ni–18%Ru alloy for contact applications
Pamir Alpay,
Mark Aindow
, (2011). Electrical and tribological properties of a Ni–18%Ru alloy for contact applications, vol. 46, iss. 20, pp. 6563-6570, Journal of Materials Science
Research Type: Journal Article
Mark Aindow
, (2011). Identification of desirable precursor properties for solution precursor plasma spray, vol. 20, iss. 4, pp. 802-816, Journal of Thermal Spray Technology, 10.1007/s11666-011-9636-y
Research Type: Journal Article
Mark Aindow,
, (2011). Effects of precursor chemistry on the structural characteristics of Y2O3-MgO nanocomposites synthesized by a combined sol-gel/thermal decomposition route, vol. 94, iss. 2, pp. 372-381, Journal of the American Ceramic Society, 10.1111/j.1551-2916.2010.04078.x
Research Type: Journal Article
, (2011). Adsorption of Pt(cod)me2 onto organic aerogels from supercritical solutions for the synthesis of supported platinum nanoparticles, Journal of Supercritical Fluids, vol. 56, iss. Issue 1, 10.1016/j.supflu.2010.10.045
Research Type: Journal Article
, (2012). Effects of microstructure on native oxide scale development and electrical characteristics of eutectic Cu-Cu6La alloys, Acta Materialia, vol. 60, iss. Issue 3, 10.1016/j.actamat.2011.11.013
Research Type: Journal Article
Discontinuous Precipitation of β-Ru Phase in Ni-18Ru Alloys
Pamir Alpay,
Mark Aindow
, (2012). Discontinuous Precipitation of β-Ru Phase in Ni-18Ru Alloys, vol. 47, iss. 15, pp. 5701-5705, Journal of Materials Science
Research Type: Journal Article
, (2012). AFM-FIB-TEM Combo Analysis of Surface Relief Caused by Various Types of deformation bands in the Ti-Mo-Based Pseudoelastic Alloys, Microscopy and Microanalysis, vol. 18, iss. Issue, 10.1017/S1431927612010719
Research Type: Journal Article
Mark Aindow,
, (2012). Microstructural characteristics of Y2O3-MgO composite coatings deposited by suspension plasma spray, Journal of Thermal Spray Technology, vol. 21, iss. Issue 6, 10.1007/s11666-012-9816-4
Research Type: Journal Article
Mark Aindow,
, (2012). Aerogel-copper nanocomposites prepared using the adsorption of a polyfluorinated complex from supercritical CO2, Journal of Nanoparticle Research, vol. 14, iss. Issue 7, Kluwer Academic Publishers, 10.1007/s11051-012-0973-7
Research Type: Journal Article
, (2012). Carbon aerogel supported nickel nanoparticles and nanorods using supercritical deposition, Journal of Supercritical Fluids, vol. 66, iss. Issue, 10.1016/j.supflu.2012.02.027
Research Type: Journal Article
Mark Aindow,
, (2013). Thermodynamic Control of Metal Loading and Composition of Carbon Aerogel Supported Pt-Cu Alloy Nanoparticles by Supercritical Deposition, vol. 117, pp. 6777–6787, Journal of Physical Chemistry C, 10.1021/jp311641g
Research Type: Journal Article
Mark Aindow,
, (2013). Formation of Spinel Reaction Layers in Manganese Cobaltite - Coated Crofer 22 APU for Solid Oxide Fuel Cell Interconnects, vol. 227, pp. 318-326, Journal of Power Sources, 10.1016/j.jpowsour.2012.07.091
Research Type: Journal Article
Selective Hydrogenation of CO2 and CO to Useful Light Olefins over Octahedral Molecular Sieve Manganese Oxide Supported Iron Catalysts
Mark Aindow,
, (2013). Selective Hydrogenation of CO2 and CO to Useful Light Olefins over Octahedral Molecular Sieve Manganese Oxide Supported Iron Catalysts, vol. 132-133, pp. 54-61, Applied Catalysis B
Research Type: Journal Article
Mark Aindow,
, (2013). Effect of Upset Forging on Microstructure and Tensile Properties in a Devitrified Al-Y-Ni-Co Alloy, vol. 48, iss. 10, pp. 3841-3851, Journal of Materials Science, 10.1007/s10853-013-7185-0
Research Type: Journal Article
Mark Aindow,
, (2013). Effects of alloy heat treatment on oxidation kinetics and scale morphology for crofer 22 APU, Journal of Power Sources, vol. 241, iss. Issue, Elsevier B.V., 10.1016/j.jpowsour.2013.03.181
Research Type: Journal Article
A Sucrose-Mediated Sol–Gel Technique for the Synthesis of MgO–Y2O3 Nanocomposites
Mark Aindow,
, (2013). A Sucrose-Mediated Sol–Gel Technique for the Synthesis of MgO–Y2O3 Nanocomposites, vol. 96, iss. 2, pp. 346-350, Journal of the American Ceramic Society
Research Type: Journal Article
Mark Aindow,
, (2013). Selective hydrogenation of CO2 and CO to useful light olefins over octahedral molecular sieve manganese oxide supported iron catalysts, Applied Catalysis B: Environmental, vol. 132-133, iss. Issue, Elsevier B.V., 10.1016/j.apcatb.2012.11.003
Research Type: Journal Article
Mark Aindow,
, (2013). Effects of Alloy Heat Treatment on Oxidation Kinetics and Scale Morphology for Crofer 22 APU, vol. 241, pp. 756–767, Journal of Power Sources, 10.1016/j.jpowsour.2013.03.181
Research Type: Journal Article
Mark Aindow,
, (2014). Effect of Heat-Treatment on Phase Stability and Grain Coarsening in a Powder-Processed Al-Ni-Co-Zr-Y Alloy, vol. 49, pp. 5866–5877, Journal of Materials Science, 10.1007/s10853-014-8297-x
Research Type: Journal Article
Mark Aindow,
, (2014). Corrigendum to “Selective hydrogenation of CO2 and CO to useful light olefins over octahedral molecular sieve manganese oxide supported iron catalysts” [Appl. Catal. B: Environ. 132–133 (2013) 54–61](S0926337312005139)(10.1016/j.apcatb.2012.11.003), Applied Catalysis B: Environmental, vol. 148-149, iss. Issue, Elsevier B.V., 10.1016/j.apcatb.2014.01.003
Research Type: Journal Article
Mark Aindow,
, (2014). The effect of Mn1.5Co1.5O4 coatings on the development of near surface microstructure for Haynes 230 oxidized at 800 °C in air, vol. 242, pp. 109–117, Surface and Coatings Technology, 10.1016/j.surfcoat.2014.01.025
Research Type: Journal Article
Substrate control of anisotropic resistivity in heteroepitaxial nanostructured arrays of cryptomelane manganese oxide on strontium titanate
Mark Aindow,
, (2014). Substrate control of anisotropic resistivity in heteroepitaxial nanostructured arrays of cryptomelane manganese oxide on strontium titanate, Small, vol. 10, iss. 1, pp. 66--72
Research Type: Journal Article
Substrate Control of Anisotropic Resistivity in Heteroepitaxial Nanostructured Arrays of Cryptomelane Manganese Oxide on Strontium Titanate
Mark Aindow,
, (2014). Substrate Control of Anisotropic Resistivity in Heteroepitaxial Nanostructured Arrays of Cryptomelane Manganese Oxide on Strontium Titanate, vol. 10, iss. 1, pp. 66-72, Small
Research Type: Journal Article
Mark Aindow
, (2014). Phase stability in a powder-processed Al–Mn–Ce alloy, vol. 49, iss. 10, pp. 3742–3754, Journal of Materials Science, 10.1007/s10853-014-8086-6
Research Type: Journal Article
Microstructure Effects in Braze Joints Formed Between Ag/W Electrical Contacts and Sn-Coated Cu using Cu-Ag-P Filler Metal
Pamir Alpay,
Mark Aindow
, (2015). Microstructure Effects in Braze Joints Formed Between Ag/W Electrical Contacts and Sn-Coated Cu using Cu-Ag-P Filler Metal, vol. 50, iss. 1, pp. 324-333, Journal of Materials Science
Research Type: Journal Article
Mark Aindow,
, (2015). Influence of electric current on microstructure evolution in Ti/Al and Ti/TiAl3 during spark plasma sintering, vol. 648, pp. 1097-1103, Journal of Alloys and Compounds, 10.1016/j.jallcom.2015.07.079
Research Type: Journal Article
Mark Aindow,
, (2015). Microstructural Effects of the Reduction Step in the Reactive Consolidation of Manganese Cobaltite Coatings on Crofer® 22 APU, vol. 32, iss. 2-Jan, pp. 142-147, Materials at High Temperatures, 10.1179/0960340914Z.00000000090]
Research Type: Journal Article
Facet-dependent catalytic activity of MnO electrocatalysts for oxygen reduction and oxygen evolution reactions
Mark Aindow,
Pamir Alpay,
Jie He,
, (2015). Facet-dependent catalytic activity of MnO electrocatalysts for oxygen reduction and oxygen evolution reactions, vol. 51, pp. 5951-5954, Chemical Communications
Research Type: Journal Article
Mark Aindow,
, (2015). Electrochemical performance of fuel cell catalysts prepared by supercritical deposition: Effect of different precursor conversion routes, Journal of Supercritical Fluids, vol. 97, iss. Issue, Elsevier B.V., 10.1016/j.supflu.2014.08.014
Research Type: Journal Article
Surface Degradation of Ag/W Circuit Breaker Contacts During Standardized UL Testing
Mark Aindow,
Pamir Alpay
, (2015). Surface Degradation of Ag/W Circuit Breaker Contacts During Standardized UL Testing, vol. 24, iss. 9, pp. 3251-3262, Journal of Materials Engineering and Performance
Research Type: Journal Article
Mark Aindow,
, (2015). The stoichiometry of metal assisted etching (MAE) of Si in V2O5 + HF and HOOH + HF solutions, Electrochimica Acta, vol. 158, iss. Issue, Elsevier Ltd, 10.1016/j.electacta.2015.01.162
Research Type: Journal Article
Metallo-Organic Solutio-Deposition of Lead Zirconate Titanate Films onto an Additively Manufactured Ni-based superalloy
Pamir Alpay,
Mark Aindow,
, (2016). Metallo-Organic Solutio-Deposition of Lead Zirconate Titanate Films onto an Additively Manufactured Ni-based superalloy, Acta Materialia, vol. 122, pp. 352-358, Acta Materialia
Research Type: Journal Article
Switchable and Tunable Film Bulk Acoustic Resonator Fabricated using Barium Strontium Titanate Active Layer and Ta2O5/SiO2 Acoustic Reflector
Mark Aindow,
Pamir Alpay,
, (2016). Switchable and Tunable Film Bulk Acoustic Resonator Fabricated using Barium Strontium Titanate Active Layer and Ta2O5/SiO2 Acoustic Reflector, Applied Physics Letters, vol. 109, iss. 5, AIP Publishing LLC
Research Type: Journal Article
Electrostatically Driven Dielectric Anomaly in Mesoscopic Ferroelectric-Paraelectric Bilayers
Pamir Alpay,
Mark Aindow,
, (2016). Electrostatically Driven Dielectric Anomaly in Mesoscopic Ferroelectric-Paraelectric Bilayers, vol. 105, pp. 68-74, Acta Materialia/Pergamon
Research Type: Journal Article
Mark Aindow
, (2016). Synthesis of Ru/PDMS nano-composites via supercritial deposition, Materials Chemistry and Physics, vol. 180, iss. Issue, Elsevier Ltd, 10.1016/j.matchemphys.2016.05.058
Research Type: Journal Article
In SituTEM Heating Experiments on PVP-Capped Silver Nano-Cubes
Jing Zhao,
Mark Aindow,
, (2016). In SituTEM Heating Experiments on PVP-Capped Silver Nano-Cubes, Microscopy and Microanalysis, vol. 22, iss. S3, pp. 822–823, Cambridge University Press
Research Type: Journal Article
Mark Aindow,
, (2016). Structure and Mechanical Properties in a Powder-Processed Icosahedral-Phase-Strengthened Aluminum Alloy, vol. 123, pp. 51-54, Scripta Materialia, 10.1016/j.scriptamat.2016.05.037
Research Type: Journal Article
Mark Aindow,
, (2016). ALCHEMI studies of site occupancies in Cr-, Ni-, and Fe-substituted manganese cobaltite spinels, Journal of Materials Science, vol. 51, iss. Issue 1, Springer New York LLC, 10.1007/s10853-015-9307-3
Research Type: Journal Article
Modified Mesoporous Silica for Efficient Siloxane Capture
Mark Aindow,
, (2016). Modified Mesoporous Silica for Efficient Siloxane Capture, Langmuir, American Chemical society
Research Type: Journal Article
Extended Aging of Ag/W Circuit Breaker Contacts: Influence on Surface Structure, Electrical Properties and UL Testing Performance
Pamir Alpay,
Mark Aindow,
, (2016). Extended Aging of Ag/W Circuit Breaker Contacts: Influence on Surface Structure, Electrical Properties and UL Testing Performance, vol. 25, iss. 1, pp. 91-101, Journal of Materials Engineering and Performance
Research Type: Journal Article
Mark Aindow
, (2016). Microstructural evolution in manganese cobaltite films grown on Crofer 22 APU substrates by pulsed laser deposition, Surface and Coatings Technology, vol. 286, iss. Issue, Elsevier B.V., 10.1016/j.surfcoat.2015.12.034
Research Type: Journal Article
Solidification Microstructures in Ag3Sn-Cu3Sn Pseudo-Binary Alloys
Mark Aindow,
Pamir Alpay,
, (2016). Solidification Microstructures in Ag3Sn-Cu3Sn Pseudo-Binary Alloys, vol. 51, iss. 13, pp. 6474-6487, Journal of Materials Science
Research Type: Journal Article
Mark Aindow,
, (2016). Microstructural transformations of La0.6Sr0.4MnO3 to nNano-layered mn oxide during electrochemical water oxidation, Microscopy and Microanalysis, vol. 22, iss. Issue, Cambridge University Press, 10.1017/S1431927616007224
Research Type: Journal Article
Mark Aindow
, (2016). Preface to the 50th Anniversary Issue of the Journal of Materials Science, vol. 51, iss. 1, pp. 6-Jan, Journal of Materials Science, 10.1007/s10853-015-9500-4
Research Type: Journal Article
Mark Aindow,
, (2017). Salt Fog Corrosion Behavior in a Powder-Processed Icosahedral-Phase-Strengthened Aluminum Alloy, Corrosion Science, vol. 121, pp. 133-138, 10.1016/j.corsci.2017.03.010
Research Type: Journal Article
Mark Aindow,
, (2017). Superelastic and micaceous deformation of the novel intermetallic compound CaFe2As2, Scripta Materialia, vol. 141, pp. 10, Elsevier, 10.1016/j.scriptamat.2017.07.008
Research Type: Journal Article
Mark Aindow
, (2017). Cold Spray Deposition of an Icosahedral-Phase-Strengthened Aluminum Alloy Coating, Surface and Coatings Technology, vol. 324, pp. 57-63, 10.1016/j.surfcoat.2017.05.049
Research Type: Journal Article
Mark Aindow,
, (2017). Control of Average Particle Size of Carbon Aerogel Supported Platinum Nanoparticles by Supercritical Deposition, Microporous and Mesoporous Materials, vol. 245, pp. 94-103, 10.1016/j.micromeso.2017.01.037
Research Type: Journal Article
Bryan Huey,
Mark Aindow,
, (2017). Ion-damage-free planarization or shallow angle sectioning of solar cells for mapping grain orientation and nanoscale photovoltaic properties, Nanotechnology, vol. 28, iss. 18, Institute of Physics Publishing, 10.1088/1361-6528/aa67c2
Research Type: Journal Article
Mark Aindow
, (2017). Focused ion beam sectioning studies of biomimetic hydroxyapatite coatings on Ti-6Al-4V substrates, Surface and Coatings Technology, vol. 313, pp. 255-262, 10.1016/j.surfcoat.2017.01.103
Research Type: Journal Article
Mark Aindow,
, (2017). Strong, ductile and thermally stable Cu-based metal-intermetallic nanostructured composites, Scientific Reports, vol. 7, pp. 40409, Springer Nature, 10.1038/srep40409
Research Type: Journal Article
Microstructural stability and phase transformations in electro-deposited cobalt-phosphorus coatings,
Mark Aindow,
, (2017). Microstructural stability and phase transformations in electro-deposited cobalt-phosphorus coatings,, Journal of Alloys and Compounds, vol. 719, pp. 142-150, 10.1016/j.jallcom.2017.05.152
Research Type: Journal Article
Mark Aindow,
, (2017). Graphene Aerogel Supported Pt Electrocatalysts for Oxygen Reduction Reaction by Supercritical Deposition, Electrochimica Acta, vol. 250, pp. 174-184, 10.1016/j.electacta.2017.08.067
Research Type: Journal Article
Metalorganic Solution Deposition of Lead Zirconate Titanate Films onto an Additively Manufactured Ni-Based Superalloy
Pamir Alpay,
Mark Aindow,
, (2017). Metalorganic Solution Deposition of Lead Zirconate Titanate Films onto an Additively Manufactured Ni-Based Superalloy, Acta Materialia, vol. 122, pp. 352-358, Elsevier
Research Type: Journal Article
Mark Aindow,
, (2017). Characterization of IrOx sputtering for IrO2 and IrO2/Pt bottom-electrode piezoelectric micro-electro-mechanical systems applications, Thin Solid Films, vol. 638, iss. Issue, Elsevier B.V., 10.1016/j.tsf.2017.07.024
Research Type: Journal Article
Microstructural Stability, Defect Structures and Deformation Mechanisms in a Ag3Sn / Cu3Sn Alloy
Pamir Alpay,
Mark Aindow,
, (2017). Microstructural Stability, Defect Structures and Deformation Mechanisms in a Ag3Sn / Cu3Sn Alloy, vol. 52, iss. 5, pp. 2944-2956, Journal of Materials Science
Research Type: Journal Article
Mark Aindow,
, (2017). FIB Preparation of Samples for MEMS-based TEM Heating Experiments, Microscopy and Microanalysis, vol. 23, iss. 4, pp. 708-716, 10.1017/S1431927617000605
Research Type: Journal Article
Transformation of La0.65Sr0.35MnO3 in electrochemical water oxidation
Mark Aindow,
, (2017). Transformation of La0.65Sr0.35MnO3 in electrochemical water oxidation, International Journal of Hydrogen Energy, vol. 42, iss. 12, pp. 8560–8568
Research Type: Journal Article
Mark Aindow
, (2017). Focused Ion Beam Preparation of Specimens for Micro-Electro-Mechanical System-based Transmission Electron Microscopy Heating Experiments, Microscopy and Microanalysis, vol. 23, iss. Issue 4, Cambridge University Press, 10.1017/s1431927617000605
Research Type: Journal Article
Mark Aindow,
, (2017). High-Pressure Torsion Induced Phase Transformations and Grain Refinement in Al/Ti Composites, Journal of Materials Science, vol. 52, pp. 12170-12184, 10.1007/s10853-017-1331-z
Research Type: Journal Article
Mark Aindow,
, (2017). Regenerative Electroless Etching of Silicon, Angewandte Chemie International Edition, vol. 56, iss. 2, pp. 624-627, Wiley, 10.1002/anie.201610162
Research Type: Journal Article
Mark Aindow
, (2018). A Nanoindentation Study of the Plastic Deformation and Fracture Mechanisms in Single-Crystalline CaFe2As2, JOM, vol. 70, iss. Issue 7, Minerals, Metals and Materials Society, 10.1007/s11837-018-2851-y
Research Type: Journal Article
Corrosion, Oxidation, Erosion and Performance of Ag/W-Based Circuit Breaker Contacts: A Review
Pamir Alpay,
Mark Aindow,
, (2018). Corrosion, Oxidation, Erosion and Performance of Ag/W-Based Circuit Breaker Contacts: A Review, Corrosion Science, vol. 135, Dec-34
Research Type: Journal Article
Mark Aindow,
, (2018). The effects of powder recycling on Ti-6Al-4V feedstocks for additive manufacturing, Materials at High Temperatures, vol. 35, pp. 217-224, 10.1080/09603409.2017.1389133
Research Type: Journal Article
Mark Aindow,
, (2018). Non-metallic inclusions in 17-4PH stainless steel parts produced by selective laser melting, Materials and Design, vol. 140, pp. 153-162, 10.1016/j.matdes.2017.11.063
Research Type: Journal Article
Mark Aindow,
, (2018). Mesoporous Carbon Aerogel Supported Pt-Cu Bimetallic Nanoparticles via Supercritical Deposition and Their Dealloying and Electrocatalytic Behaviour, Catalysis Today, vol. 310, pp. 166-175, 10.1016/j.cattod.2017.09.023
Research Type: Journal Article
Mark Aindow,
, (2018). Unraveling the Mesoscale Evolution of Microstructure during Supersonic Impact of Aluminum Powder Particles, Scientific Reports, vol. 8, pp. 10075, 10.1038/s41598-018-28437-3
Research Type: Journal Article
Mark Aindow,
, (2018). Constitutive modeling of high temperature flow behavior in a Ti-45Al-8Nb-2Cr-2Mn-0.2Y alloy, Scientific Reports, vol. 8, pp. 5453, 10.1038/s41598-018-23617-7
Research Type: Journal Article
Mark Aindow,
, (2018). Effect of IrO2/Pt, IrO2, and Pt bottom electrodes on the structure and electrical properties of PZT-based piezoelectric microelectromechanical system devices, Journal of Materials Science: Materials in Electronics, vol. 29, pp. 11367–11377, 10.1007/s10854-018-9224-8
Research Type: Journal Article
Effect of transition metal alloying elements on the deformation of Ti-44Al-8Nb-0.2B-0.2Y alloys
Mark Aindow,
, (2018). Effect of transition metal alloying elements on the deformation of Ti-44Al-8Nb-0.2B-0.2Y alloys, Scientific Reports, vol. 8, pp. 14242
Research Type: Journal Article
Mark Aindow,
, (2018). Microstructure and preparation of an ultra-fine-grained W-Al2O3composite via hydrothermal synthesis and spark plasma sintering, International Journal of Refractory Metals and Hard Materials, vol. 72, pp. 149-156, 10.1016/j.ijrmhm.2017.12.022
Research Type: Journal Article
Effect of Heat Treatments on Microstructural Evolution of Additively Manufactured and Wrought 17-4PH Stainless Steel Parts
Mark Aindow,
, (2018). Effect of Heat Treatments on Microstructural Evolution of Additively Manufactured and Wrought 17-4PH Stainless Steel Parts, Materials & Design, vol. 156, pp. 429-440
Research Type: Journal Article
Mark Aindow,
, (2018). Hydrogen annealing effects on local structures and oxidation states of atomic layer deposited SnOx, Journal of Vacuum Science and Technology A, vol. 36, iss. 3, pp. 031519(1-9), 10.1116/1.5026696
Research Type: Journal Article
Microstructure and Micromechanical Response in Gas-Atomized Al 6061 Alloy Powder and Cold-Sprayed Splats
Mark Aindow
, (2018). Microstructure and Micromechanical Response in Gas-Atomized Al 6061 Alloy Powder and Cold-Sprayed Splats, Journal of Thermal Spray Technology, vol. 27, iss. 8, pp. 1563-1578
Research Type: Journal Article
Defect structures in solution-grown single crystals of the intermetallic compound Ag3Sn
Mark Aindow
, (2018). Defect structures in solution-grown single crystals of the intermetallic compound Ag3Sn, Journal of Materials Science, vol. 53, iss. 7, pp. 5317–5328
Research Type: Journal Article
Mark Aindow,
, (2018). Comparison of virgin Ti-6Al-4V powders for additive manufacturing, Additive Manufacturing, vol. 21, pp. 544-555, 10.1016/j.addma.2018.02.011
Research Type: Journal Article
Mark Aindow
, (2018). Insights into the plasticity of Ag3Sn from Density Functional Theory, International Journal of Plasticity, vol. 110, pp. 57-73, Elsevier, 10.1016/j.ijplas.2018.06.008
Research Type: Journal Article
Aerobic self-esterification of alcohols assisted by mesoporous manganese and cobalt oxide
Mark Aindow,
, (2019). Aerobic self-esterification of alcohols assisted by mesoporous manganese and cobalt oxide, ChemCatChem, vol. 11, pp. 3413-3422
Research Type: Journal Article
Studies of thermally activated processes in gas-atomized Al alloy powders: in situ STEM heating experiments on FIB-cut cross-sections
Mark Aindow,
, (2019). Studies of thermally activated processes in gas-atomized Al alloy powders: in situ STEM heating experiments on FIB-cut cross-sections, Journal of Materials Science, vol. 54, iss. 13, pp. 9921-9932
Research Type: Journal Article
Mechanical properties of supersonic-impacted Al6061 microparticles
Mark Aindow,
, (2019). Mechanical properties of supersonic-impacted Al6061 microparticles, Scripta Materialia, vol. 171, pp. 52-56, Elsevier
Research Type: Journal Article
Eutectic Microstructures in Dilute Al-Ce and Al-Co Alloys
Mark Aindow,
, (2019). Eutectic Microstructures in Dilute Al-Ce and Al-Co Alloys, Materials Characterization, vol. 154, pp. 269-276
Research Type: Journal Article
Supercritical Deposition Coupled with Ammonia Treatment: A New Route to Co Promoted N-doped Carbon Aerogels with High ORR Activity
Mark Aindow,
, (2019). Supercritical Deposition Coupled with Ammonia Treatment: A New Route to Co Promoted N-doped Carbon Aerogels with High ORR Activity, Energy Technology, vol. 7, iss. 11, pp. 1900450
Research Type: Journal Article
Hierarchical Nanostructuring of Porous Silicon with Electrochemical and Regenerative Electroless Etching
Mark Aindow,
, (2019). Hierarchical Nanostructuring of Porous Silicon with Electrochemical and Regenerative Electroless Etching, ACS Nano, vol. 13, iss. 11, pp. 13056-13064
Research Type: Journal Article
Development of Quasicrystal Morphology in Gas-Atomized Icosahedral-Phase-Strengthened Aluminum Alloy Powders
Mark Aindow,
, (2019). Development of Quasicrystal Morphology in Gas-Atomized Icosahedral-Phase-Strengthened Aluminum Alloy Powders, Materials & Design, vol. 182, pp. 108094
Research Type: Journal Article
Crystallographically Determined Etching and Its Relevance to the Metal Assisted Catalytic Etching (MACE) of Silicon Powders
Mark Aindow,
, (2019). Crystallographically Determined Etching and Its Relevance to the Metal Assisted Catalytic Etching (MACE) of Silicon Powders, Frontiers in Chemistry, vol. 6, pp. 651
Research Type: Journal Article
Surfactant selection as a strategy for tailoring the structure and properties of UCT manganese oxides
, (2019). Surfactant selection as a strategy for tailoring the structure and properties of UCT manganese oxides
Research Type: Journal Article
Magnetic and Tunable Dielectric Properties of DyCrO3 Thin Films
Mark Aindow,
Menka Jain
, (2019). Magnetic and Tunable Dielectric Properties of DyCrO3 Thin Films, Journal of Materials Science, vol. 54, iss. 12, pp. 8984-8994
Research Type: Journal Article
Temperature Calibration of In Situ TEM Specimen Heating Holders by Isothermal Sublimation of Silver Nanocubes
Mark Aindow
, (2019). Temperature Calibration of In Situ TEM Specimen Heating Holders by Isothermal Sublimation of Silver Nanocubes, Ultramicroscopy, vol. 196, pp. 142-153
Research Type: Journal Article
Mark Aindow,
, (2019). Mechanical properties of supersonic-impacted Al6061 powder particles, Scripta Materialia, vol. 171, iss. Issue, Acta Materialia Inc, 10.1016/j.scriptamat.2019.06.024
Research Type: Journal Article
Fabrication of a multi-phase porous high-temperature Mo-Si-B alloy by in-situ reaction synthesis
Mark Aindow,
, (2019). Fabrication of a multi-phase porous high-temperature Mo-Si-B alloy by in-situ reaction synthesis, Powder Metallurgy, vol. 62, pp. 258-266
Research Type: Journal Article
Mesoscale evolution of jet initiation behavior and microstructure evolution during cold spray single particle impact
Mark Aindow,
, (2019). Mesoscale evolution of jet initiation behavior and microstructure evolution during cold spray single particle impact, Acta Materialia, vol. 182, pp. 197-206, Elsevier
Research Type: Journal Article
Low-load metal-assisted catalytic etching produces scalable porosity in Si powders
Mark Aindow
, (2020). Low-load metal-assisted catalytic etching produces scalable porosity in Si powders, ACS Applied Materials and Interfaces, vol. 12, pp. 48969-48981
Research Type: Journal Article
Mark Aindow
, (2020). Multifunctional transition metal doped titanium dioxide reduced graphene oxide composites as highly efficient adsorbents and photocatalysts, Microporous and Mesoporous Materials, vol. 307, iss. Issue, Elsevier B.V., 10.1016/j.micromeso.2020.110521
Research Type: Journal Article
Atomic-Layer Adhesion of Ferroelectric Nanoparticles: A New Approach to Dielectric Composites
Pamir Alpay,
Mark Aindow,
, (2020). Atomic-Layer Adhesion of Ferroelectric Nanoparticles: A New Approach to Dielectric Composites, Journal of Materials Science, vol. 55, pp. 16063 - 16073
Research Type: Journal Article
Uniaxial compression of [001]-oriented CaFe2As2 single crystal: the effect of microstructure and temperature on superelasticity Part II: Modeling
Mark Aindow,
, (2020). Uniaxial compression of [001]-oriented CaFe2As2 single crystal: the effect of microstructure and temperature on superelasticity Part II: Modeling, Acta Materialia, vol. 203, pp. 116462, Elsevier
Research Type: Journal Article
Microstructure/Mechanical Behavior Relationships in Upset-Forged Powder-Processed Icosahedral-Phase-Strengthened Aluminum Alloys
Mark Aindow,
, (2020). Microstructure/Mechanical Behavior Relationships in Upset-Forged Powder-Processed Icosahedral-Phase-Strengthened Aluminum Alloys, Materials Science and Engineering A, vol. 788, pp. 139487
Research Type: Journal Article
Thermally activated structural transformations in manganese oxide nanoparticles under inert and oxidizing environments
Mark Aindow,
, (2020). Thermally activated structural transformations in manganese oxide nanoparticles under inert and oxidizing environments, Journal of Materials Science, vol. 55, iss. 17, pp. 7247-7258
Research Type: Journal Article
Multifunctional Transition Metal Doped Titanium Dioxide Reduced Graphene Oxide Composites as Highly Efficient Adsorbents
Mark Aindow
, (2020). Multifunctional Transition Metal Doped Titanium Dioxide Reduced Graphene Oxide Composites as Highly Efficient Adsorbents, Microporous and Mesoporous Materials, vol. 307, pp. 110521
Research Type: Journal Article
Uniaxial compression of [001]-oriented CaFe2As2 single crystal: the effect of microstructure and temperature on superelasticity Part I: Experimental Observation
Mark Aindow
, (2020). Uniaxial compression of [001]-oriented CaFe2As2 single crystal: the effect of microstructure and temperature on superelasticity Part I: Experimental Observation, Acta Materialia, vol. 203, pp. 116464, Elsevier
Research Type: Journal Article
Controlling the nature of etched Si nanostructures: High versus low load metal-assisted catalytic etching (MACE) of Si powders
Mark Aindow,
, (2020). Controlling the nature of etched Si nanostructures: High versus low load metal-assisted catalytic etching (MACE) of Si powders, ACS Applied Materials and Interfaces, vol. 12, iss. 4, pp. 4787-4796
Research Type: Journal Article
Corrosion Phenomena in Powder-Processed Icosahedral-Phase-Strengthened Aluminum Alloys
Mark Aindow,
, (2020). Corrosion Phenomena in Powder-Processed Icosahedral-Phase-Strengthened Aluminum Alloys, Corrosion Science, vol. 177, pp. 108970
Research Type: Journal Article
Shock-Induced Deformation Twinning and Softening in Magnesium Single Crystals
Mark Aindow,
, (2020). Shock-Induced Deformation Twinning and Softening in Magnesium Single Crystals, Materials and Design, vol. 194, pp. 108884, Elsevier
Research Type: Journal Article
Highly Active Carbon Supported PtCu Electrocatalysts for PEMFCs by in-situ Supercritical Deposition Coupled with Electrochemical Dealloying
Mark Aindow,
, (2020). Highly Active Carbon Supported PtCu Electrocatalysts for PEMFCs by in-situ Supercritical Deposition Coupled with Electrochemical Dealloying, Fuel Cells, vol. 20, iss. 3, pp. 285-299
Research Type: Journal Article
Mark Aindow
, (2020). Mesoscale modeling of jet initiation behavior and microstructural evolution during cold spray single particle impact, Acta Materialia, vol. 182, iss. Issue, Acta Materialia Inc, 10.1016/j.actamat.2019.10.039
Research Type: Journal Article
Surface States of Gas-Atomized Al 6061 Powders – Effects of Heat Treatment
Mark Aindow,
, (2020). Surface States of Gas-Atomized Al 6061 Powders – Effects of Heat Treatment, Applied Surface Science, vol. 534, pp. 147643
Research Type: Journal Article
Effect of Laser Scan Length on the Microstructure of Additively Manufactured 17-4PH Stainless Steel Thin-Walled Parts
Mark Aindow,
, (2020). Effect of Laser Scan Length on the Microstructure of Additively Manufactured 17-4PH Stainless Steel Thin-Walled Parts, Additive Manufacturing
Research Type: Journal Article
Three-dimensional particle size, shape, and internal porositycharacterization: Application to five similar titanium alloy (Ti–6Al–4V)powders and comparison to two-dimensional measurements
Mark Aindow
, (2021). Three-dimensional particle size, shape, and internal porositycharacterization: Application to five similar titanium alloy (Ti–6Al–4V)powders and comparison to two-dimensional measurements, Additive Manufacturing, vol. 44, pp. 102060
Research Type: Journal Article
Thermal Stability of Quasicrystals in an Icosahedral-Phase-Strengthened Aluminum Alloy
Mark Aindow,
, (2021). Thermal Stability of Quasicrystals in an Icosahedral-Phase-Strengthened Aluminum Alloy, Materials Characterization, vol. 181, pp. 111490
Research Type: Journal Article
Pseudoelasticity of SrNi2P2 microvillar via lattice collapse and expansion
Mark Aindow,
, (2021). Pseudoelasticity of SrNi2P2 microvillar via lattice collapse and expansion, Nano Letters, vol. 21, pp. 7913, American Chemical Society
Research Type: Journal Article
Precipitation phenomena in a powder-processed quasicrystal-reinforced Al-Cr-Mn-Co-Zr alloy
Mark Aindow
, (2021). Precipitation phenomena in a powder-processed quasicrystal-reinforced Al-Cr-Mn-Co-Zr alloy, Materials Characterization, vol. 178, pp. 111239
Research Type: Journal Article
Mark Aindow,
, (2021). Uniaxial compression of [001]-oriented CaFe2As2 single crystals:the effects of microstructure and temperature on superelasticity Part I: Experimental observations, Acta Materialia, vol. 203, iss. Issue, Acta Materialia Inc, 10.1016/j.actamat.2020.11.006
Research Type: Journal Article
A Promising Catalyst for the Dehydrogenation of Perhydro-Dibenzyltoluene: Pt/Al2O3 Prepared by Supercritical CO2 Deposition
Mark Aindow,
, (2022). A Promising Catalyst for the Dehydrogenation of Perhydro-Dibenzyltoluene: Pt/Al2O3 Prepared by Supercritical CO2 Deposition, Catalysts, vol. 12, pp. 489
Research Type: Journal Article
Heterogeneous Distribution of Mechanical Properties of Single Particle Cold Spray Impacts
Mark Aindow
, (2022). Heterogeneous Distribution of Mechanical Properties of Single Particle Cold Spray Impacts, Journal of Thermal Spray Technology, vol. 31, pp. 498-507, Springer
Research Type: Journal Article
The role of corrosion product layers in the pitting resistance of powder-processed Al–Cr–Co–Mn–Zr alloys containing icosahedral quasicrystalline dispersoids
Mark Aindow,
, (2022). The role of corrosion product layers in the pitting resistance of powder-processed Al–Cr–Co–Mn–Zr alloys containing icosahedral quasicrystalline dispersoids, Journal of Materials Science, vol. 57, pp. 20850-20866
Research Type: Journal Article
Preparation of Pt- and PtPd/Al2O3 Catalysts by Supercritical Deposition and Their Performance for Oxidation of Nitric Oxide and Propene
Mark Aindow,
, (2022). Preparation of Pt- and PtPd/Al2O3 Catalysts by Supercritical Deposition and Their Performance for Oxidation of Nitric Oxide and Propene, Catalysis Today
Research Type: Journal Article
Polyamide aerogel-derived n-doped carbon aerogel decorated with platinum nanoparticles as highly active and stable electrocatalysts for oxygen reduction reaction
Mark Aindow,
, (2022). Polyamide aerogel-derived n-doped carbon aerogel decorated with platinum nanoparticles as highly active and stable electrocatalysts for oxygen reduction reaction, Electrochimica Acta, vol. 434, pp. 141251
Research Type: Journal Article
Use of Laser Glazing to Evaluate an Al-Cr-Co-Mn-Zr Alloy Containing Icosahedral Quasicrystalline Dispersoids as a Candidate Material for Additive Manufacturing
Mark Aindow
, (2022). Use of Laser Glazing to Evaluate an Al-Cr-Co-Mn-Zr Alloy Containing Icosahedral Quasicrystalline Dispersoids as a Candidate Material for Additive Manufacturing, Additive Manufacturing, vol. 59, pp. 103114
Research Type: Journal Article
, (2023). Thermal stability of laser track microstructures in an Al-Cr-Co-Mn-Zr I-phase alloy, Materials Characterization, vol. 203, iss. Issue, Elsevier Inc., 10.1016/j.matchar.2023.113123
Research Type: Journal Article
Effects of Rhodium Doping on Dislocation Nucleation in a [001] SrNi2P2 Single Crystal Under Spherical Nanoindentation
Mark Aindow,
, (2023). Effects of Rhodium Doping on Dislocation Nucleation in a [001] SrNi2P2 Single Crystal Under Spherical Nanoindentation, Journal of Materials Research, vol. 38, pp. 3491-3503, Springer Nature
Research Type: Journal Article
Thermal Stability of Laser Track Microstructures in an Al-Cr-Co-Mn-Zr I-Phase Alloy
Mark Aindow
, (2023). Thermal Stability of Laser Track Microstructures in an Al-Cr-Co-Mn-Zr I-Phase Alloy, Materials Characterization, vol. 203, pp. 113123, Elsevier
Research Type: Journal Article
Grain size effect on the mechanical properties of nanocrystalline magnesium aluminate spinel
Mark Aindow,
, (2023). Grain size effect on the mechanical properties of nanocrystalline magnesium aluminate spinel, Acta Materialia, vol. 251, pp. 118881, Elsevier
Research Type: Journal Article
Quasicrystal Stability in Complex Aluminum Alloys: Insights from First Principles Models on Structural Motifs in Crystalline Approximants
Mark Aindow,
Pamir Alpay,
, (2023). Quasicrystal Stability in Complex Aluminum Alloys: Insights from First Principles Models on Structural Motifs in Crystalline Approximants, Scripta Materialia, vol. 222, pp. 115046
Research Type: Journal Article
Laser Glazing of a Quasicrystal-Reinforced Al-Cu-Fe-Cr Alloy: Implications for Use in Additive Manufacturing
Mark Aindow,
Pamir Alpay,
, (2023). Laser Glazing of a Quasicrystal-Reinforced Al-Cu-Fe-Cr Alloy: Implications for Use in Additive Manufacturing, Scripta Materialia, vol. 226, pp. 115249
Research Type: Journal Article
Nanostructural Effects Beyond Hall-Petch: Towards Superhard Tungsten Carbide
Mark Aindow,
, (2024). Nanostructural Effects Beyond Hall-Petch: Towards Superhard Tungsten Carbide, Acta Materialia, Elsevier
Research Type: Journal Article
Tension-compression asymmetry in superelasticity of SrNi2P2 single crystals and the influence of low temperatures
Mark Aindow,
, (2024). Tension-compression asymmetry in superelasticity of SrNi2P2 single crystals and the influence of low temperatures, Acta Materialia, vol. 274, iss. 119989, Elsevier
Research Type: Journal Article
Triplex steel powder design to avoid hot cracking in laser-powder bed fusion using computational thermodynamics
Mark Aindow,
, (2024). Triplex steel powder design to avoid hot cracking in laser-powder bed fusion using computational thermodynamics, Additive Manufacturing, vol. 86, pp. 104196, Elsevier
Research Type: Journal Article
Mark Aindow
, (2024). Transformations in laser track microstructures for a quasicrystal-reinforced Al-Cu-Fe-Cr alloy, Materials Characterization, vol. 217, iss. Issue, Elsevier Inc., 10.1016/j.matchar.2024.114345
Research Type: Journal Article
Computational design of grain-refined isotropic triplex steels for laser powder bed fusion
Mark Aindow,
, (2025). Computational design of grain-refined isotropic triplex steels for laser powder bed fusion, Progress in Additive Manufacturing, Springer Nature
Research Type: Journal Article
, (2025). Microstructural development in an Al–Cr–Co–Mn–Zr I-phase alloy processed by laser powder bed fusion, Journal of Materials Science, vol. 60, iss. Issue 7, Springer, 10.1007/s10853-025-10672-5
Research Type: Journal Article
Martensitic transformation induced strength-ductility synergy in additively manufactured maraging 250 steel by thermal history engineering
Mark Aindow,
, (2025). Martensitic transformation induced strength-ductility synergy in additively manufactured maraging 250 steel by thermal history engineering , Journal of Materials Science & Technology, vol. 211, pp. 212–225, Elsevier, https://doi.org/10.1016/j.jmst.2024.05.062
Research Type: Journal Article
New findings and current controversies in the reaction of ruthenium red and ammonium cerium(IV) nitrate: Focus on the precipitated compound
New findings and current controversies in the reaction of ruthenium red and ammonium cerium(IV) nitrate: Focus on the precipitated compound
Research Type: Journal Article